Technics – SL-1210G (Black)

20.599,00 lei TVA inclus

Conventional analogue turntables have problems with degradation in sound quality caused by factors such as minute speed vibration during rotation and rotation irregularity called “cogging.” In the SL-1200G, the use of a newly developed coreless direct-drive motor with no iron core eliminates cogging. Also, the twin-rotor construction reduces the bearing load while maintaining high torque and also reduces minute vibration during rotation.

These factors enable reproduction of the warm, exquisitely detailed sound etched on analogue records.

view cart



High-precision Motor Control Technology

The application of motor control technology developed for Blu-ray devices and switching the drive mode depending on the operational status of the motor achieve a high-starting torque and high-speed stability.


Three-layered Turntable Platter

The turntable has a three-layered construction with a rigidly combined brass and aluminium die-cast platter. With a deadening rubber covering its entire rear surface to eliminate unnecessary resonance, thereby achieving high rigidity and vibration damping. This delivers smooth rotational stability and inertial mass surpassing the SP-10MK2, the direct-drive turntable standard used by broadcast stations worldwide, as well as having more than twice the inertial mass of the SL-1200MK5.


Concept of Three-layered Turntable Platter

Graph of Damping Characteristics

High-level Balance Adjustment

When the weight distribution of the turntable is uneven, excess vibration or noise occurs during rotation, which causes degradation in sound quality. Therefore, the balance of the turntable is adjusted at the factory by using specialized high-precision balance adjustment equipment for each and every item after the turntable is assembled. Turntables that have undergone adjustment are labelled with a sticker reading “BALANCED” to indicate that adjustment has been done.


Balance Adjuster

“BALANCED” sticker indicating balance adjustment completed

Exhaustive measurement performed to examine whether the surface deflection of the platter is within limits

High-sensitive Tonearm

The tonearm employs lightweight magnesium which has a high damping effect, with cold drawing improving the characteristics of the material and achieving the high-precision required. In addition, high initial-motion sensitivity is attained by employing the traditional Technics gimbal suspension construction with horizontal rotation axis and the vertical rotation axis intersecting at a single central point, as well as high-precision bearings using a cut-processed housing.


High-precision Bearings


Supplied auxiliary weights support a wide variety of cartridges


Four-layered Cabinet Construction

A hairline-processed, 10-mm-thick top panel of immaculate aluminium has been added to the previous three-layered construction of aluminium die-cast, BMC, and heavyweight-class rubber on the SL-1200MK5. This four-layered construction combines high rigidity with a high-quality finish and feel.

Concept of Four-layered Cabinet Construction

High-quality Terminals

The use of brass-milled, gold-plated phono terminals and ground terminals prevent degradation in sound quality while enabling the easy attaching and detaching of cables. Also the use of metal shielding construction inside the case reduces the effects of external noise.


Direct Drive Manual Turntable
Turntable Speeds
33 1/3, 45, 78 rpm
Adjust Range
±8%, ±16%
Starting Torque
3.3 kg・cm (2.8 lb-in)
Build-up Characteristics
0.7 s. from standstill to 33 1/3 r/min
Wow And Flutter
0.025% W.R.M.S. (JIS C5521)
78dB (IEC 98A Weighted)
Turntable Platter
Brass and Aluminum diecast combined

Diameter:332mm (13-5/64″)

Weight:About 3.6kg (7 15/16 lb) (Including rubber sheet)

Tonearm Section

Universal Static Balance
Effective Length
230mm (9-1/16″)
15mm (19/32″)
Tracking Error Angle
Within 2° 32’ (at the outer groove of 30cm(12″) record)

Within 0° 32’ (at the inner groove of 30cm(12″) record)

Offset Angle
Arm-height Adjustment Range
0 – 6 mm
Stylus Pressure Adjustment Range
0 – 4 g (direct reading)
Head Shell Weight
Approx. 7.6 g
Applicable Cartridge Weight Range
(without auxiliary weight)

5.6 – 12.0g

14.3 – 20.7g (including headshell)

(with small auxiliary weight)

10.0 – 16.4g

18.7 – 25.1g (including headshell)

(with large auxiliary weight)

14.3 – 19.8g

23.0 – 28.5g (including headshell)

Cartridge Mounting Dimension
JIS 12.7 mm Interval
Head Shell Terminal Lug
1.2 mm φ 4-pin Terminal Lug


Audio Output
PHONO (Pin Jack) x 1



Power Supply
AC120 V, 60 Hz
Power Consumption
14 W Approx. 0.2W (Standby)
Dimensions (W x H x D)
453 x 173 x 372 mm

17-27/32 x 6-13/16 x 14-21/32 inch

Approx. 18 kg

Approx. 39.7lbs

Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight(S), Auxiliary weight(L), Head shell, Overhang gauge, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Screw set for turntable, Owner’s Manual

Informații tehnice

Weight 18 kg
Dimensions 45,3 × 37,2 × 17,3 cm




You may also like…